Condensing Dryer

Stack Front-Load Washer Front-Load Dryer with Stacking Kit (Not Included)

$30

Stack Front-Load Washer Front-Load Dryer with Stacking Kit (Not Included)

MOST COMMONLY, A STACKING KIT MUST BE PURCHASED SEPARATELY. CHECK THE MANUFACTURER SPECIFICATIONS TO VERIFY.

MAKE SURE TO VERIFY THAT THERE IS ENOUGH HEIGHT AVAILABLE AS WELL AS ENOUGH WIDTH TO REACH BEHIND THE MACHINES TO CONNECT THE HOSES/VENTING. IF STACKING INSIDE OF A CLOSET, WE CANNOT ACCOMMODATE A DRIP PAN AS THE MACHINES NEED TO BE STACKED BEFORE BEING PUSHED BACK INTO THE CLOSET AND WE THEREFORE WOULD NOT BE ABLE TO LIFT BOTH MACHINES SIMULTANEOUSLY INTO THE DRIP PAN. IF THE WIDTH OF THE AREA IS RESTRICTED, LONGER INSTALL PARTS (HOSES, CORDS, FLEXLINES, ETC) MAY BE REQUIRED BECAUSE CONNECTIONS MAY NEED TO BE MADE PRIOR TO PLACING THE APPLIANCES INTO THE FINAL DESTINATION.

THIS INSTALLATION ALSO INCLUDES DISCONNECTING THE OLD APPLIANCE PRIOR TO COMPLETING THE INSTALLATION, AS LONG AS IT CAN BE DISCONNECTED WITHOUT DAMAGE TO THE FLOOR, SURROUNDING CABINETRY OR CONNECTED PLUMBING/ELECTRIC.

Removal (Haul-Away) of Old Appliance

$0

Removal (Haul-Away) of Old Appliance

REMOVALS OF OLD APPLIANCES ARE ONLY INCLUDED WHEN THE SAME CATEGORY OF APPLIANCE IS BEING DELIVERED. INCLUDES REMOVING A DISCONNECTED APPLIANCE FROM THE SAME ROOM THE REPLACEMENT PRODUCT IS INSTALLED IN (THE SAME PATH THAT THE DELIVERED PRODUCT IS BROUGHT IN THROUGH). ANY ADDITIONAL STAIRS OR OBSTRUCTIONS WILL RESULT IN A $25.00 CHARGE. WHEN REMOVING REFRIGERATORS FROM THE BASEMENT, QUEEN APPLIANCE ASSUMES NO LIABILITY FOR DAMAGE TO THE PROPERTY. IMPORTANT NOTE: APPLIANCE MUST BE EMPTIED OF ALL PERSONAL PROPERTY (FOOD, COOKWARE, CLOTHING, ETC) PRIOR TO DELIVERY. QUEEN APPLIANCE ASSUMES NO RESPONSIBILITY FOR PERSONAL PROPERTY LEFT INSIDE APPLIANCE AS THEY ARE QUICKLY DISPOSED OF AFTER DELIVERY.

Extra Flight(s) of Stairs

$25

Extra Flight(s) of Stairs

THE BASE DELIVERY FEE ASSUMES THAT THE PRODUCTS ARE GOING INTO A ROOM AT STREET LEVEL. IF AN ADDITIONAL FLIGHT(S) OF STAIRS EXIST INSIDE THE HOUSE BETWEEN THE ENTRANCE TO THE HOUSE AND THE FINAL INSTALLATION PLACE, THEN AN ADDITIONAL FEE IS REQUIRED. THIS IS A CHARGE FOR THE ENTIRE ORDER, REGARDLESS OF THE NUMBER OF PIECES OR FLIGHTS. FOR LAUNDRY APPLIANCES: ONE FLIGHT OF STAIRS IS COMPLIMENTARY (NO EXTRA CHARGE).

IF THE WEIGHT / SIZE OF THE PRODUCTS REQUIRES A 3RD PERSON THEN AN "EXTRA MAN FEE" WILL BE REQUIRED AND MUST BE SCHEDULED AHEAD OF TIME.

Install Steam Dryer (Electric) Including 220v Cord Plus Steam Kit

$60

Install Steam Dryer (Electric) Including 220v Cord Plus Steam Kit

THIS INCLUDES A STEAM KIT TO CONNECT A STEAM DRYER TO THE WATER SUPPLY. SOME DRYERS DO NOT OFFER STEAM FUNCTIONALITY, IN WHICH CASE THIS DOES NOT APPLY.

THIS INSTALL INCLUDES A BRAND NEW ELECTRIC DRYER CORD. PLEASE VERIFY YOU HAVE THE NECESSARY 220V DRYER RECEPTACLE AND CONFIRM WHICH PLUG TYPE (3-PRONG VS 4-PRONG).

DIRECT HARDWIRE INSTALLATIONS REQUIRE AN ELECTRIC DRYER RECEPTACLE TO BE INSTALLED PER LOCAL CODE AND CAN BE PURCHASED AT THE TIME OF SALE FOR AN EXTRA FEE.

IF THE DRYER'S 220V ELECTRIC RECEPTACLE IS NOT DIRECTLY BEHIND YOUR DRYER, PLEASE VERIFY THAT THE STANDARD 4 FT. DRYER CORD WILL REACH YOUR RECEPTACLE.

DRYER VENTING CAN BE RE-USED WHEN REPLACING AN OLD DRYER. NEW CONSTRUCTION PROPERTIES OFTEN DO NOT HAVE THE REQUIRED VENTING ON SITE. NEW, FLEXIBLE VENTING CAN BE PURCHASED AT THE TIME OF SALE.

QUEEN APPLIANCE ONLY STOCKS AND INSTALLS FLEXIBLE, ACCORDION-STYLE, SOFT, METAL DRYER DUCT VENTING. IF YOU REQUIRE RIGID VENTING, YOU MUST CONTACT AN HVAC CONTRACTOR OR ANOTHER THIRD PARTY TO INSTALL RIGID VENTING.

Install Dryer (Electric) Including 4-Foot 220v Cord

$40

Install Dryer (Electric) Including 4-Foot 220v Cord

DOES NOT INCLUDE A STEAM KIT TO CONNECT A STEAM DRYER TO THE WATER SUPPLY. SOME DRYERS DO NOT OFFER STEAM FUNCTIONALITY, IN WHICH CASE THIS DOES NOT APPLY. PLEASE CHECK WITH YOUR SALES ASSOCIATE IF YOU NEED TO PURCHASE A $20 STAINLESS STEEL DRYER STEAM KIT.

THIS INSTALL INCLUDES A BRAND NEW ELECTRIC DRYER CORD. PLEASE VERIFY YOU HAVE THE NECESSARY 220V DRYER RECEPTACLE AND CONFIRM WHICH PLUG TYPE (3-PRONG VS 4-PRONG).

DIRECT HARDWIRE INSTALLATIONS REQUIRE AN ELECTRIC DRYER RECEPTACLE TO BE INSTALLED PER LOCAL CODE AND CAN BE PURCHASED AT THE TIME OF SALE FOR AN EXTRA FEE.

IF THE DRYER'S 220V ELECTRIC RECEPTACLE IS NOT DIRECTLY BEHIND YOUR DRYER, PLEASE VERIFY THAT THE STANDARD 4 FT. DRYER CORD WILL REACH YOUR RECEPTACLE.

DRYER VENTING CAN BE RE-USED WHEN REPLACING AN OLD DRYER. NEW CONSTRUCTION PROPERTIES OFTEN DO NOT HAVE THE REQUIRED VENTING ON SITE. NEW, FLEXIBLE VENTING CAN BE PURCHASED AT THE TIME OF SALE.

QUEEN APPLIANCE ONLY STOCKS AND INSTALLS FLEXIBLE, ACCORDION-STYLE, SOFT, METAL DRYER DUCT VENTING. IF YOU REQUIRE RIGID VENTING, YOU MUST CONTACT AN HVAC CONTRACTOR OR ANOTHER THIRD PARTY TO INSTALL RIGID VENTING.

8' Flex Dryer Venting and 2 Clamps (Kit) - LDFLXVNT8

$15

8' Flex Dryer Venting and 2 Clamps (Kit) - LDFLXVNT8

8' Flex Dryer Venting and 2 Clamps (Kit) - LDFLXVNT8

3-Prong Electric Dryer Cord

$15

3-Prong Electric Dryer Cord

3-Prong Electric Dryer Cord

4-Prong Electric Dryer Cord

$15

4-Prong Electric Dryer Cord

4-Prong Electric Dryer Cord