Scratch & Dent Discount Appliances In Phoenixville, Frazer, and King of Prussia, Pennsylvania

Energy-efficient & lightweight residential grade units

Chill is energy efficient and easy-to-handle. Almost every model is ENERGY STAR® qualified, and the programmable timer plus the MoneySaver® setting help manage energy use and reduce costs.

With capacities from 5450 to 23500 Btu/h and the Auto Air Sweep feature, Chill can evenly cool a single room or a large open space. All models include a remote control. To determine the appropriate cooling capacity, see our sizing guide and model specifications .

Chill is flexible: Install models CP06-CP24 thru-the-wall* or in a window using the included hardware. Up to 29% lighter than Kuhl models of comparable capacity, Chill units are easy to maneuver. Plus, the slide-out chassis , which greatly simplifies installation and maintenance, is available starting with the 6000 Btu/h CP06.

The Auto Air Sweep* swing louvers provide consistent air distribution, for even cooling throughout the room or in large, open spaces.

* CP05 must be installed in a window.

• Cooling from: 5450 23500 Btu/h

• Comfort and Durability
  
  • 24-hour timer lets you program on/off times
  • Auto Air Sweep swing louvers* provide more even air distribution
  • Side Air Discharge*
  • 3 cooling and fan speeds**
  • MoneySaver® setting* saves energy by cycling the fan with the compressor
  • Ultra-quiet operation
  • 4-way air-flow control
  • Auto restart saves settings if power is interrupted
  • Digital remote control that adjusts mode, fan speed, temperature and sets the timer***.
• Energy Management and Compliance
  
  • ENERGY STAR® qualified models
  • MoneySaver® setting saves money by conserving energy
• Health and IAQ
  
  • Washable, antimicrobial air filter
  • Stale air exhaust*

• Maintenance and Installation
  
  • Slide-out chassis*
  • Install in window or thru-the-wall*
  • Standard installation hardware
  • Expandable side curtains
  • Power cord can run either left or right out of the unit front
• Safety and Security
  
  • EntryGard anti-intrusion protection

• Cooling from: 8000 to 23500 Btu/h
• Heating: 3850 to 12000 Btu/h

For spaces needing heat in addition to cooling, we've added models with electric heat. Chill+ will heat and cool spaces from 300-1500 sq ft, depending on unit capacity. 2-speed settings each for fan, cooling and heating modes.

Energy-efficient & lightweight residential grade units

Chill is energy efficient and easy-to-handle. Almost every model is ENERGY STAR® qualified, and the programmable timer plus the MoneySaver® setting help manage energy use and reduce costs.

With capacities from 5450 to 23500 Btu/h and the Auto Air Sweep feature, Chill can evenly cool a single room or a large open space. All models include a remote control. To determine the appropriate cooling capacity, see our sizing guide and model specifications .

Chill is flexible: Install models CP06-CP24 thru-the-wall* or in a window using the included hardware. Up to 29% lighter than Kuhl models of comparable capacity, Chill units are easy to maneuver. Plus, the slide-out chassis , which greatly simplifies installation and maintenance, is available starting with the 6000 Btu/h CP06.

The Auto Air Sweep* swing louvers provide consistent air distribution, for even cooling throughout the room or in large, open spaces.

* CP05 must be installed in a window.

• Cooling from: 5450 23500 Btu/h

• Comfort and Durability
  
  • 24-hour timer lets you program on/off times
  • Auto Air Sweep swing louvers* provide more even air distribution
  • Side Air Discharge*
  • 3 cooling and fan speeds**
  • MoneySaver® setting* saves energy by cycling the fan with the compressor
  • Ultra-quiet operation
  • 4-way air-flow control
  • Auto restart saves settings if power is interrupted
  • Digital remote control that adjusts mode, fan speed, temperature and sets the timer***.
• Energy Management and Compliance
  
  • ENERGY STAR® qualified models
  • MoneySaver® setting saves money by conserving energy
• Health and IAQ
  
  • Washable, antimicrobial air filter
  • Stale air exhaust*

• Maintenance and Installation
  
  • Slide-out chassis*
  • Install in window or thru-the-wall*
  • Standard installation hardware
  • Expandable side curtains
  • Power cord can run either left or right out of the unit front
• Safety and Security
  
  • EntryGard anti-intrusion protection

• Cooling from: 8000 to 23500 Btu/h
• Heating: 3850 to 12000 Btu/h

For spaces needing heat in addition to cooling, we've added models with electric heat. Chill+ will heat and cool spaces from 300-1500 sq ft, depending on unit capacity. 2-speed settings each for fan, cooling and heating modes.

Energy-efficient & lightweight residential grade units

Chill is energy efficient and easy-to-handle. Almost every model is ENERGY STAR® qualified, and the programmable timer plus the MoneySaver® setting help manage energy use and reduce costs.

With capacities from 5450 to 23500 Btu/h and the Auto Air Sweep feature, Chill can evenly cool a single room or a large open space. All models include a remote control. To determine the appropriate cooling capacity, see our sizing guide and model specifications .

Chill is flexible: Install models CP06-CP24 thru-the-wall* or in a window using the included hardware. Up to 29% lighter than Kuhl models of comparable capacity, Chill units are easy to maneuver. Plus, the slide-out chassis , which greatly simplifies installation and maintenance, is available starting with the 6000 Btu/h CP06.

The Auto Air Sweep* swing louvers provide consistent air distribution, for even cooling throughout the room or in large, open spaces.

* CP05 must be installed in a window.

• Cooling from: 5450 23500 Btu/h

• Comfort and Durability
  
  • 24-hour timer lets you program on/off times
  • Auto Air Sweep swing louvers* provide more even air distribution
  • Side Air Discharge*
  • 3 cooling and fan speeds**
  • MoneySaver® setting* saves energy by cycling the fan with the compressor
  • Ultra-quiet operation
  • 4-way air-flow control
  • Auto restart saves settings if power is interrupted
  • Digital remote control that adjusts mode, fan speed, temperature and sets the timer***.
• Energy Management and Compliance
  
  • ENERGY STAR® qualified models
  • MoneySaver® setting saves money by conserving energy
• Health and IAQ
  
  • Washable, antimicrobial air filter
  • Stale air exhaust*

• Maintenance and Installation
  
  • Slide-out chassis*
  • Install in window or thru-the-wall*
  • Standard installation hardware
  • Expandable side curtains
  • Power cord can run either left or right out of the unit front
• Safety and Security
  
  • EntryGard anti-intrusion protection

• Cooling from: 8000 to 23500 Btu/h
• Heating: 3850 to 12000 Btu/h

For spaces needing heat in addition to cooling, we've added models with electric heat. Chill+ will heat and cool spaces from 300-1500 sq ft, depending on unit capacity. 2-speed settings each for fan, cooling and heating modes.

Energy-efficient & lightweight residential grade units

Chill is energy efficient and easy-to-handle. Almost every model is ENERGY STAR® qualified, and the programmable timer plus the MoneySaver® setting help manage energy use and reduce costs.

With capacities from 5450 to 23500 Btu/h and the Auto Air Sweep feature, Chill can evenly cool a single room or a large open space. All models include a remote control. To determine the appropriate cooling capacity, see our sizing guide and model specifications .

Chill is flexible: Install models CP06-CP24 thru-the-wall* or in a window using the included hardware. Up to 29% lighter than Kuhl models of comparable capacity, Chill units are easy to maneuver. Plus, the slide-out chassis , which greatly simplifies installation and maintenance, is available starting with the 6000 Btu/h CP06.

The Auto Air Sweep* swing louvers provide consistent air distribution, for even cooling throughout the room or in large, open spaces.

* CP05 must be installed in a window.

• Cooling from: 5450 23500 Btu/h

• Comfort and Durability
  
  • 24-hour timer lets you program on/off times
  • Auto Air Sweep swing louvers* provide more even air distribution
  • Side Air Discharge*
  • 3 cooling and fan speeds**
  • MoneySaver® setting* saves energy by cycling the fan with the compressor
  • Ultra-quiet operation
  • 4-way air-flow control
  • Auto restart saves settings if power is interrupted
  • Digital remote control that adjusts mode, fan speed, temperature and sets the timer***.
• Energy Management and Compliance
  
  • ENERGY STAR® qualified models
  • MoneySaver® setting saves money by conserving energy
• Health and IAQ
  
  • Washable, antimicrobial air filter
  • Stale air exhaust*

• Maintenance and Installation
  
  • Slide-out chassis*
  • Install in window or thru-the-wall*
  • Standard installation hardware
  • Expandable side curtains
  • Power cord can run either left or right out of the unit front
• Safety and Security
  
  • EntryGard anti-intrusion protection

• Cooling from: 8000 to 23500 Btu/h
• Heating: 3850 to 12000 Btu/h

For spaces needing heat in addition to cooling, we've added models with electric heat. Chill+ will heat and cool spaces from 300-1500 sq ft, depending on unit capacity. 2-speed settings each for fan, cooling and heating modes.

Universal fit for existing thru-the-wall sleeves

Energy-efficient operation

Many Uni-Fit cooling-only models are ENERGY STAR® qualified. See our sizing guide and model specifications for details on cooling and/or heating capacity.

Uni-Fit's smaller dimensions are designed to fit a range of sleeve sizes. The included Universal-Fit trim ring will bridge a small gap between the unit and the existing sleeve. The trim ring will fill gaps up to 1" on the sides and 1/2" on the top of the unit, to provide a finished and neat appearance.

warranty" />

Covering an air conditioner s side vents can restrict air flow, diminish performance and potentially void the warranty. Our solid-side sleeve has no side vents and can be installed through walls up to 16 1/4" without compromising performance.

A flush mount provides a clean exterior appearance; for a slimmer interior profile, adjust the positioning of the unit accordingly during installation.

• Cooling from: 8000-13000 Btu
• Heating: 3850-11200 Btu

Detailed specifications by model

• Comfort and Convenience
  
  • Six-way air-flow control
  • Stale-air exhaust
  • Remote control
  • 24-hour programmable timer
  • Three-speed fan
  • Auto restart
  • Washable antimicrobial filter
  • Defrost control
• Energy Management
  
  • MoneySaver® setting saves money by conserving energy
  • ENERGY STAR® qualified models

• Durability & Quality
  
  • Rotary compressors provide quiet, dependable performance
  • Seacoast protection for corrosion resistance in harsh environments
  • AHAM-certified performance
  • UL and C-UL-US listed
• Installation Features
  
  • Uni-Fit chassis is 24" wide for installations from 24.5" to 27"
  • Universal fit trim ring for a neat, installed appearance with larger sleeves
  • USC sleeve designed to fit a standard 26" opening. Sleeve is required for new installations. USC sleeve is sold separately.
  • Optional replacement exterior grille available for use with existing sleeve

  Note: New installations require a USC sleeve, which is sold and shipped separately (see Accessories for details)

Universal Fit for Existing Thru-the-Wall Sleeves
Forget complex retrofits -- Uni-Fit can replace virtually any thru-the-wall air conditioner, from a sleeve designed to fit a standard 26 opening to one as small as 24 1/2 . It s also an excellent value for new installations. It can mount flush with an exterior wall for a clean look so you keep your window view. Choose from cooling-only or cooling with supplemental electric heat models. All models come with a remote control for convenient operation. Our Sizing Guide and Specifications by Model will help you select the appropriate cooling and/or heating capacity.

US10C30 & US12C10 -2010 models only:

These models were removed from the ENERGY STAR® program in September of 2011. We apologize for any confusion surrounding this situation. For consumers who purchased one of these models on or before September 30, 2011, Friedrich will offer consumers a one-time cash rebate of $30. An application form is available below or by calling 1-800-541-6645 ext. 260.

Download the US10C30 rebate form here.

Download the US12C10 rebate form here.

1" gap on sides and 1/2" gap at top, which allows installation into varying sleeve sizes, can be covered by two-piecce trim ring that fits over the chassis front. Trim ring comes standard with chassis

Uni-Fit s smaller dimensions fit a range of sleeve sizes. Depending on your sleeve, there may be a gap of up to 1 on the sides and 1/2 on top between the unit and the existing sleeve. The included universal-fit trim ring covers the gap easily for a neat, finished appearance.

Uni-Fit can replace a variety of name-brand air conditioners, including Carrier, GE/Hotpoint, Whirlpool, Amana, Feeders, and more.

Unlike solid-side thru-the-wall air conditioners, window air conditioners have side vents. Covering these vents (as shown to the right) can restrict air flow, diminish performance and could even void your warranty so we strongly advise against it. Our solid-side sleeve has no side vents. You can install it through walls without compromising performance. See the sleeve and chassis dimension chart for information on maximum wall depth.

• Cooling from: 8000-13000 Btu with up to 9.6 EER
• Heating: 3850-11200 Btu

• Comfort & Convenience
  
  • Six-way air flow control
  • Stale air exhaust
  • Remote control
  • 12-hour programmable timer
  • 3-speed fan
  • Auto restart
  • Washable, antimicrobial filter
  • Defrost control
• Energy Savings
  
  • Money Saver® setting saves money by conserving energy
  • Three ENERGY STAR® models

• Durability & Quality
  
  • Rotary compressors provide quiet, dependable performance
  • Seacoast protection for corrosion resistance in harsh environments
  • AHAM certified performance
  • UL and C-UL-US listed
• Installation Features
  
  • Universal-fit trim ring closes gaps between unit and sleeve
  • Sleeve designed to fit a standard 26 opening and sleeves as small as 24.5 . Sleeve sold separately
  • New installations require a USC sleeve, which is sold and shipped separately (See Accessories ).

Universal Fit for Existing Thru-the-Wall Sleeves
Forget complex retrofits -- Uni-Fit can replace virtually any thru-the-wall air conditioner, from a sleeve designed to fit a standard 26 opening to one as small as 24 1/2 . It s also an excellent value for new installations. It can mount flush with an exterior wall for a clean look so you keep your window view. Choose from cooling-only or cooling with supplemental electric heat models. All models come with a remote control for convenient operation. Our Sizing Guide and Specifications by Model will help you select the appropriate cooling and/or heating capacity.

US10C30 & US12C10 -2010 models only:

These models were removed from the ENERGY STAR® program in September of 2011. We apologize for any confusion surrounding this situation. For consumers who purchased one of these models on or before September 30, 2011, Friedrich will offer consumers a one-time cash rebate of $30. An application form is available below or by calling 1-800-541-6645 ext. 260.

Download the US10C30 rebate form here.

Download the US12C10 rebate form here.

1" gap on sides and 1/2" gap at top, which allows installation into varying sleeve sizes, can be covered by two-piecce trim ring that fits over the chassis front. Trim ring comes standard with chassis

Uni-Fit s smaller dimensions fit a range of sleeve sizes. Depending on your sleeve, there may be a gap of up to 1 on the sides and 1/2 on top between the unit and the existing sleeve. The included universal-fit trim ring covers the gap easily for a neat, finished appearance.

Uni-Fit can replace a variety of name-brand air conditioners, including Carrier, GE/Hotpoint, Whirlpool, Amana, Feeders, and more.

Unlike solid-side thru-the-wall air conditioners, window air conditioners have side vents. Covering these vents (as shown to the right) can restrict air flow, diminish performance and could even void your warranty so we strongly advise against it. Our solid-side sleeve has no side vents. You can install it through walls without compromising performance. See the sleeve and chassis dimension chart for information on maximum wall depth.

• Cooling from: 8000-13000 Btu with up to 9.6 EER
• Heating: 3850-11200 Btu

• Comfort & Convenience
  
  • Six-way air flow control
  • Stale air exhaust
  • Remote control
  • 12-hour programmable timer
  • 3-speed fan
  • Auto restart
  • Washable, antimicrobial filter
  • Defrost control
• Energy Savings
  
  • Money Saver® setting saves money by conserving energy
  • Three ENERGY STAR® models

• Durability & Quality
  
  • Rotary compressors provide quiet, dependable performance
  • Seacoast protection for corrosion resistance in harsh environments
  • AHAM certified performance
  • UL and C-UL-US listed
• Installation Features
  
  • Universal-fit trim ring closes gaps between unit and sleeve
  • Sleeve designed to fit a standard 26 opening and sleeves as small as 24.5 . Sleeve sold separately
  • New installations require a USC sleeve, which is sold and shipped separately (See Accessories ).

Guest room solutions for the hospitality industry. Digital controls with remote. Owner controlled energy management tools and maintenance-friendly design. 7,000-15,000 BTU/h.

Quiet, Easy to Field Modify, Powerful

Friedrich PTACs are known for being feature-rich and backed by an AC-focused manufacturer. Our new models build on these strengths, with advanced engineering that delivers impressively quiet performance with expanded comfort settings.

Here are just some of the enhanced features:

• Reduced sound levels: The two-motor design one motor inside, one outside allows the indoor motor to run at slower speeds, which sharply reduces indoor sound levels. Plus, the motors are permanently lubricated for quieter operation and increased durability.
• More comfort choices, quieter operation: Our 3-speed fan (cooling and heating modes) has nearly five times the surface area of a typical PTAC fan, allowing for more uniform airflow over a wider path. The result is faster, more even air distribution and quieter airflow. Guests/residents will appreciate having more comfort options. Plus, the soft start/stop fan delay reduces transitional noise usually associated with compressor start-up.
• Increased energy savings: Models have EERs up to 12.0 and COPs up to 3.4. Separate thermostat limits for cooling and heating provide greater control over temperature ranges. Of course, centralized desk control and compatibility with energy management systems can boost efficiency and lower operational costs.
• A universal heater/power cord simplifies installation, ordering: Installers can change the heat output simply by changing the standard power cord to the desired size. The optional cords connect as easily as a phone jack. Distributors can stock fewer PTAC models and optional power cords instead of numerous PTAC models. (Note: All wiring and building connections must be properly sized to accommodate the power cord. See model specifications for details.

Plus, all capacities can fit standard 42-inch sleeves without the added expense of a baffle kit*.

* Sleeves are sold and shipped separately to accommodate new construction and replacement requirements.

• Cooling from: 7700-15000 Btu
• Heating: 6300-13300 Btu

• Comfort & Dehumidification
  
  • Quieter operation
  • Intuitive controls
  • Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
  • Separate thermostat settings (limiting) for cooling and heating nodes
  • Samples the room temperature every 9 minutes to monitor and maintain desired temperature
  • “Instant Heat" in heat pump mode quickly heats a room to the desired temperature
  • Dehumidification mode removes up to 3.2 pts per hour
  • Optional constant fan mode for additional comfort options
  • Reversible indoor air louvers for an additional airflow direction option
  • Emergency heat will engage (in heating mode) in the event of a power failure
• Sound Reduction Technology
  
  • New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
  • The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
  • Permanently lubricated dual motors reduce noise
  • New elongated fan moves air over a wider area so it's quieter
  • Fan turns on before the compressor starts to muffle the sound
  • High-density insulation helps keep outdoor noise outside
• Durability
  
  • Diamonblue Technology advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
  • Faultless surehold Front cover system attaches securely
  • Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
  • Random compressor resistant protects
    electrical systems
  • Stainless Steel endplates on both indoor and outdoor coil
  • Indoor coil frost sensor protects the compressor
  • Durable front panel with break-proof control door and design
  • Permanently lubricated fan motors
  • Tamper-resistant grille
  • Durable, powder coat paint finish

• Health and IAQ
  
  • Fresh-air vent
  • Two washable, antimicrobial filters
• Energy Usage: Management
  
  • Increase or decrease electric heat output by changing the power cord
  • Set separate heat and cool range limits
  • Desk control ready
  • Energy Management System Compatible
  • Electronic defrost control
• Maintenance and Installation Features
  
  • Service error code storage
  • May be installed flush with floor
  • Reversible indoor air louvers
  • Improved weather barrier
  • Nationwide Service Network
  • Modular design and pop out wiring modules

Guest room solutions for the hospitality industry. Digital controls with remote. Owner controlled energy management tools and maintenance-friendly design. 7,000-15,000 BTU/h.